Erbium-doped fiber power amplifier (BA, Booster-Amplifier) is usually used to increase the power of optical signals in the range of -6dBm~+3dBm or higher, with a maximum saturation power of 26dBm, which is usually used to increase the emission power of laser light sources.
| Features | Applications |
| · High Gain
· High Dynamic Range |
· Fiber Communications
· Fiber Laser · Fiber Sensors |
| Optical Parameter | Unit | Typical Values | Remark |
| Wavelength Range | nm | 1530~1565nm | C-band |
| Input Power | dBm | -6~+3 | |
| Saturated output power | dBm | 15/17/20/23/25/26 | @-3dBm input |
| Noise Figure | dB | 5.0 | @-3dBm input |
| Gain Flatness | dB | 3 | |
| Polarization Dependent Gain | dB | <0.3 | |
| Polarization Mode Dispersion | ps | 0.5 | |
| Input/output Isolation | dB | >35 | |
| Fiber Type | – | SMF-28 | 1.0m length |
| Optical Connector | – | FC/APC | |
| Control Mode | – | Automatic current control (ACC) /
Automatic power control (APC) |
*Note 1 |
| Electrical and environmental parameters | Desktop | Module |
| Control Mode | Button | RS232 |
| Communication Interface | * Optional | DB9 Female |
| Power Supply | 100~240V AC, <30W | 5V DC, <15W |
| Dimensions | 260(W)×280(D)×120(H)mm | 125(W)×150(D)×20(H)mm |
| Operation Temperature Range | -5~+55°C | |
| Operation Humidity Range | 0~70% | |
Note 1:
- ACC mode-automatic current control: the EDFA pump working current is set by the user and automatically locked by the EDFA to achieve a constant pump current. When the input optical power fluctuates, the output power will also fluctuate accordingly, which is applicable to all EDFA models.
- APC mode-automatic power control: the user sets the signal light output power of the EDFA, PD automatically monitors and feeds back the output power, EDFA control and self-adaptive adjustment of the pump to achieve the stability of the output signal. The advantage of the APC mode is that when the input optical power fluctuates, the EDFA will reduce the output power fluctuation as much as possible, and it is suitable for power and line EDFAs.
Ordering Information P/N: ①-②-③-④-⑤-⑥
When you inquire, please provide the correct P/N number according to our ordering information, and attach the appropriate description would be better.
| ① | ② | ③ | ④ | ⑤ | ⑥ |
| EDFA | Operation Wavelength | Amplifier type | Output power(dBm) | Fiber Type | Package Type |
| C: C-band | BA: Booster Amplifier | 15/17/20/23/25/26 | SM: SMF-28e | M: Module
B: Desktop |
Request a quote
Please provide the following information so that we may process your quote quickly, Please let us know more about your inquiry. If you do not give us any information, we will think that you are not serious, and you might not get a reply from us.
